450mm Vertical Sack Sealer

Description

Vertical Sack Sealer

Size: 450mm Length x 5mm Seal width.
Pedestal mounted Impulse Sealer with foot switch, working height 850mm with an adjustable support shelf.
The vertical bag sealer is suitable for sealing bags that are required to kept upright like sacks for flowable product like liquids and powders or powders and bulky materials like gravel, aggregates or firewood.
Foot Switch Sealers provide a faster hands free sealing operation.
Supplied with stand, pedestal, adjustable worktable and spare element.
All heat sealers from PackSealer are built to the high specification and incorporate an adjustable timer control to suit a wide variety of films from 2 x 25μ (2 x 100 gauge) to 2 x 150μ (2 x 600 gauge). Approximately up to 10 packages can be sealed per minute.

Picture is for information and show the similar manual option.

Power 1000w, Weight 45kg

Please take a look at this model PSV605X2A which is generally in stock.
Vertical Heat Sealer 600mm Foot Pedal Operated Double Heat (packsealer.co.uk)

In automatic mode the sealer will close at pre-set intervals without the need to press the foot switch.

Picture is for information and shows the similar single heat option.

The seal width is 5mm, however a 8mm conversion is available.

To ensure that you have continued products a maintenance kit is a good optional addition.

The vertical sealer comes with a heavy duty support stand and adjustable product support tray.

The PSV range of heavy duty sealers are delivered on a pallet. Weight 50kg.

Important note.

When sealing the initial load creates a spike in demand for a fraction of a second that can trip the electrical breaker.  This type of spike is common with motors when they start up. We recommend that a C type breaker is installed (commonly called motor rated) which accommodate the spike. Alternatively  a B32 type breaker.

A B type breaker may trip when the voltage goes over the limit for 100 milliseconds and the C type work on a longer time period before they trip.  This heat sealer can go over the 20amp (B20) for more than 100 milliseconds but not over 32 amp (B32).

Additional information